OPERATING MACHINE 3. Do not operate the breaker with the hydraulic cylinders fully extended or retracted. When operating the breaker, position each hydraulic cylinder so that an allowance more than 50 mm from the stroke end can be given before the cylinder piston comes into contact with the cylinder head or bottom. Failure to do so may result in damage to the hydraulic cylinders, arm and/or boom. WRONG M1M7-05-021 4. Do not operate the breaker in water. Seals may become broken due to rusting of the breaker, possibly allowing rust, dust, and/or water to enter the hydraulic circuit so that damage to the hydraulic components on the base machine may result. WRONG M104-05-059 5.
Do not use the breaker to lift objects. Serious accidents WRONG may result due to tipping over of the machine and/or coming off of the lifted load. M1M7-05-022 6. Do not operate the breaker over the side of the machine. WRONG The machine stability is reduced, possibly resulting in tipping over of the machine. In addition, the service lifetime of the undercarriage may become shorter due to receiving more severe breaker operation reaction force. RIGHT RIGHT WRONG M1M7-05-017 5-21