MAINTENANCE Periodic Replacement of Parts To ensure safe and long trouble free operation, be sure to conduct periodic inspections of the machine. In addition, the parts as listed below are directly related to safety operation so that they are recommended to be periodically replaced. These part material properties will change due to aging, or repeated operation may cause deterioration, wear, and/or fatigue of these parts, possibly resulting in serious safety/fire hazards. It is very difficult to gauge the remaining service lifetime of these parts simply by visual inspection alone. For this reason, replace these parts at the intervals shown in the table below.
If any of these parts are found to be defective by inspection, immediately replace it regardless of the recommended intervals. Consult your authorized dealer for correct replacement. f NOTE: When replacing a hose, be sure to replace seals, such as O-rings and gaskets, along with the hose.
7-8 Periodic Replacement Parts Replacement Interval Engine Fuel hose (Fuel tank to filter) Every 2 years Fuel hose (Fuel tank to injection pump) Heater hose (Heater to engine) Engine rubber vibration insulator Every 5 years or 3000 hours, whichever comes first Pump coupling Hydraulic System Base Machine Pump suction hose Every 2 years Pump delivery hose Swing hose Auxiliary hose Oil cooler hose (C/V to oil cooler) Front Attachment Boom cylinder line hose Arm cylinder line hose Bucket cylinder line hose Pilot hose Seat Belt Every 3 years