hitachi — Hitachi ZX14-3/ZX16-3/ZX18-3/ZX27-3 Hydraulic Excavator Operator's Manual

MAINTENANCE 2 Bucket and Link Pins --- every 100 hours Grease all submerged pins after operating in water. M503-07-092 3 Blade Pins (ZX27-3) --- every 500 hours or every year Blade connecting pin Blade cylinder rod end and bottom M1LA-07-037 Precautions for Front Attachment and Blade Removal 1. When pins are removed to replace the front attachment or blade, do not attempt to clean the bore insides of the bushings. 2. Before installing the front attachment or the blade, apply grease sufficiently to the pin-boss ends or the dust seals of the cylinders. 3. Be sure to install at least one shim on both sides of front joint pins. 4.

When the swing post is disassembled, coat the pins and the thrust plates with grease before reinstalling them. 7-18