hitachi — Hitachi ZX14-3/ZX16-3/ZX18-3/ZX27-3 Hydraulic Excavator Operator's Manual

MAINTENANCE Change Gear Oil --- every 1000 hours ZX14-3, 16-3, 18-3 1. Park the machine on a level surface. 2. Rotate the travel motor until plugs are positioned as illustrated on the right. Stop the engine. 2 3. Remove drain plug (2) and plug (1) to drain oil. 4. After draining oil completely, clean plug (1). Install plug 1 M577-07-014 (1). Tightening torque: 35 ± 5 N·m (3.5 ± 0.5 kgf·m, 25.3 ± 3.6 lbf·ft) 5. Supply oil through the thread hole for plug (2). f NOTE: Refer to the recommended oil and grease chart on 2 page 7-11 for the brand names of oils. 6. Add oil until oil flows out of the tread hole for plug (2). Oil Quantity: 0.25 L (0.26 US qt) 7.

After cleaning plugs (2), reinstall the plugs. 1 Tightening torque: 35 ± 5 N·m M577-07-015 (3.5 ± 0.5 kgf·m, 25.3 ± 3.6 lbf·ft) 7-25