MAINTENANCE ZX27-3 1. Park the machine on a level surface. 2. Rotate the travel motor until plugs are positioned as illustrated on the right. Stop the engine. 3. Slowly loosen plug (1) to release pressure. 4. Remove drain plug (3) and plug (1) to drain oil. 5. After draining oil completely, clean plug (3). Wrap the threads of plug (3) with sealing-type tape. Install plug (3). Tightening torque: 35 ± 5 N·m (3.5 ± 0.5 kgf·m, 25.3 ± 3.6 lbf·ft) 1 6. Supply oil through the thread hole for plug (1). f NOTE: Refer to the recommended oil and grease chart on 2 page 7-10 for the brand names of oils. 3 7. Remove plug (2). Add oil until oil flows out of the tread hole for plug (2). 8.
After cleaning plugs (1 and 2), wrap the threads of the Tightening torque: 35 ± 5 N·m plugs with sealing-type tape. Reinstall the plugs. M585-07-080 (3.5 ± 0.5 kgf·m, 25.3 ± 3.6 lbf·ft) 7-26