hitachi — Hitachi ZX14-3/ZX16-3/ZX18-3/ZX27-3 Hydraulic Excavator Operator's Manual

MAINTENANCE Change Hydraulic Oil --- every 1000 hours or 2000 hours d WARNING: Be sure to work only after oil temperature 3 is low or before operation. Failure to do so may allow high temperature oil to spray, possibly causing severe burns. IMPORTANT: When changing hydraulic oil, take care not to allow foreign matter such as dirt, water or soil to enter the hydraulic system. Hydraulic oil changing intervals differ according to kind of hydraulic oil used. M1M7-05-024 1. Park the machine on a solid level surface. Position the machine with the arm cylinder fully retracted and the bucket cylinder fully extended. Lower the bucket and blade to the ground. Stop the engine. 2.

Open the right side cover. Loosen filler cap (1) on the hydraulic oil tank to release air pressure from the hydraulic oil tank. 3. Remove cap (1). 4. Arrange a container with the capacity approximately 40 liter (11 US gal). Drain oil using a suction pump. M1NC-00-010 ZX14-3, 16-3, 18-3 1 1 ZX27-3 M1NC-05-011 7-30