MAINTENANCE Hose Fitting Metal Face Seal Fittings (Width Across Flats of Union Nut: 17, 19, 22, and 27 mm) Fittings are used on smaller size hoses. Metal flare seat (4) on adapter (1) and metal flare (5) on hose (2) ends seal pressure oil. 2 5 3 4 1 Precaution for Application Take care not to damage flare seat (4) and flare (5) when disconnecting or connecting them. M202-07-051 Tightening Torque Tighten adapter (1) and nut (3) to the torque values shown in the table below. ±10% 41 210 (21) (155) Tightening torque 7-40 17 19 22 27 36 N·m 24.5 29.5 39 64 180 (kgf·m) (2.5) (3) (4) (6.5) (18) (lbf·ft) (18) (21.5) (29) (47) (133)