MAINTENANCE Quick Coupler 1. Connection Procedure 1.1 While pulling and fully turning socket ring (1) counterclockwise, insert socket ring (1) onto plug (3) until the end face of socket ring (1) comes in contact with plug (3). 1 3 1.2 Release socket ring (1). Check that socket ring (1) is slightly moved backward by the spring force and that the coupler is held in position with balls (2). Be sure to check that socket ring (1) has been moved back fully to the right original position. M1M7-07-006 2 2. Disconnection Procedure 2.1 While pulling and fully turning socket ring (1) counterclockwise, disconnect the coupler.
As no check valve is provided in the coupler, take care that oil may flow out of the coupler when the coupler is disconnected. 2.2 After the coupler is disconnected, plug the holes with the exclusively prepared plugs. IMPORTANT: • Take care not to damage the joint surfaces when disconnecting or connecting the coupler. • Before disconnecting or connecting the coupler, clean the coupler and its surroundings with a cleaning solvent and completely wipe off the cleaning solvent. Use extra care not to allow foreign matter such as dirt to enter the coupler. • Disconnect or connect the coupler in the correct procedure. Confirm by inspection that no oil leak is present after connecting the coupler.
• After connecting the coupler, check that socket ring (1) has been moved back fully to the right original position. 7-41