MAINTENANCE 13 Check Tightening Torque of Bolts and Nuts --- every 250 hours (first time after 50 hours) Tighten or retighten all bolts and nuts to the torque values shown in the Table below. In addition, check bolts and nuts for looseness and omission. if any are loose or missing, be sure to retighten or supply new parts. Check tightness after the first 50 hours then every 250 hours. ZX14-3, 16-3, 18-3 IMPORTANT: • Before installing, clean the bolt and nut threads to remove soil, rust, and/or dust. • When installing new bolts and/or nuts, apply lubricant (e.g. white zinc B dissolved into spindle oil) to the screw threads. • Tighten bolts and nuts to the specifications.
If tightened with excessively high or inadequate torque, missing or breakage of bolts and/or nut may result. • In case the counterweight mounting bolts became loose, consult your authorized dealer for retightening. 7-77 No. Descriptions Bolt Dia. mm Q’ty Wrench Size mm Torque N⋅m (kgf⋅m) (lbf⋅ft) 1. Engine cushion rubber mounting bolt 12 4 19 90 (9) (65) 2. Engine bracket mounting bolt (Front) 10 8 17 50 (5) (36) 3. Hydraulic oil tank mounting bolt 12 4 19 90 (9) (65) 4.
Union joints for hydraulic hoses and pipes Metal face seal fitting for hydraulic hoses and piping 7/16-20UNF 17 25 (2.5) (18) 9/16-18UNF 19 30 (3) (22) 22 40 (4) (29) 3/4-16UNF 27 95 (9.5) (69) 1-1/16-12UNF 36 180 (18) (129) 5. Pump mounting bolt 12 2 19 90 (9) (65) 6. Pump cover mounting bolt 10 8 17 50 (5) (36) 7. Control valve mounting bolt 10 4 17 50 (5) (36) Control valve base mounting bolt 10 4 17 50 (5) (36) 8. Swing device mounting bolt 12 4 19 90 (9) (65) 9. Battery mounting nut 6 4 10 5 (0.5) (3.5) 10. Canopy mounting bolt 10 3 17 50 (5) (36) 12 4 19 90 (9) (65) 11. Cab mounting bolt 12 4 19 90 (9) (65) 16 4 24 210 (21) (152) 12.
Swing bearing mounting bolt Upperstructure 10 16 17 50 (5) (36) Undercarriage 10 18 17 50 (5) (36) 13. Travel device mounting bolt 10 16 8 (Socket) 65 (6.5) (47) 14. Sprocket mounting bolt 10 18 8 (Socket) 65 (6.5) (47) 15. Lower roller mounting bolt 14 12 22 180 (18) (130) 16. Cover mounting bolt 6 10 5 (0.5) (3.5) 8 13 10 (1) (7) 10 17 50 (5) (36) 17. Counterweight mounting bolt 14 4 30 400 (41) (297) 18. Front pin lock plate bolts 8 13 20 (2) (14) 10 17 50 (5) (36) 12 19 90 (9) (65) 14 22 140 (14) (101) 16 24 210 (21) (152)