hitachi — Hitachi ZX14-3/ZX16-3/ZX18-3/ZX27-3 Hydraulic Excavator Operator's Manual

MAINTENANCE ZX27-3 IMPORTANT: • Before installing, clean the bolt and nut threads to remove soil, rust, and/or dust. • When installing new bolts and/or nuts, apply lubricant (e.g. white zinc B dissolved into spindle oil) to the screw threads. • Tighten bolts and nuts to the specifications. If tightened with excessively high or inadequate torque, missing or breakage of bolts and/or nut may result. • In case the counterweight mounting bolts became loose, consult your authorized dealer for retightening. 7-78 No. Descriptions Bolt Dia. mm Q’ty Wrench Size mm Torque N⋅m (kgf⋅m) (lbf⋅ft) 1. Engine cushion rubber mounting bolt 12 4 19 90 (9) (65) 2.

Engine bracket mounting bolt (Front) 10 8 17 50 (5) (36) 3. Hydraulic oil tank mounting bolt 12 4 19 90 (9) (65) 4. Union joints for hydraulic hoses and pipes Metal face seal fitting for hydraulic hoses and piping 7/16-20UNF 17 25 (2.5) (18) 9/16-18UNF 19 30 (3) (22) 22 40 (4) (29) 3/4-16UNF 27 95 (9.5) (69) 1-1/16-12UNF 36 180 (18) (129) 5. Pump mounting bolt 12 2 19 90 (9) (65) 6. Pump cover mounting bolt 10 6 17 50 (5) (36) 7. Control valve mounting bolt 10 4 17 50 (5) (36) Control valve base mounting bolt 10 4 17 50 (5) (36) 8. Swing device mounting bolt 14 6 22 140 (14) (101) 9. Battery mounting nut 6 4 10 5 (0.5) (3.5) 10. Cab mounting bolt 16 4 24 210 (21) (152) 11.

Swing bearing mounting bolt Upperstructure 12 23 19 90 (9) (65) Undercarriage 12 20 19 90 (9) (65) 12. Travel device mounting bolt 12 22 19 90 (9) (65) 13. Sprocket mounting bolt 12 22 19 127 (13) (94) 14. Upper roller 16 2 24 210 (21) (152) 15. Lower roller mounting bolt 14 12 22 245 (25) (181) 16. Cover mounting bolt 6 10 5 (0.5) (3.5) 8 13 10 (1) (7) 10 17 50 (5) (36) 17. Counterweight mounting bolt 22 3 32 540 (55) (398) 18. Front pin lock plate bolts 8 13 20 (2) (14) 10 17 50 (5) (36) 12 19 90 (9) (65) 14 22 140 (14) (101) 16 24 210 (21) (152)