hitachi — Hitachi ZX14-3/ZX16-3/ZX18-3/ZX27-3 Hydraulic Excavator Operator's Manual

STORAGE Storing Machine 1. Thoroughly wash the machine to remove dirt, soil and debris from the machine. 2. Inspect the machine. Repair worn or damaged parts. Install new parts if necessary. 3. Clean the primary air cleaner element. 4. Lubricate all grease points. 5. Retract all hydraulic cylinders, if possible. If not, coat exposed cylinder rods with grease. 6. Park the tracks on long stable blocks. 7. Remove the battery and store them in a dry protected place after charging fully. If not removed, disconnect the negative battery cable from the (–) terminal. 8. Add an antirust agent to the coolant. In cold weather, add an antifreeze, or drain the coolant completely.

Be sure to attach a “No Water in Radiator” tag on a clearly visible location if the system is drained. 10. Paint necessary areas to prevent rust. 9. Loosen the alternator belt and fan belt. 11. Store the machine in a dry, protected place. If stored outside, cover with a waterproof cover. 12. If the machine is stored for a long time, oil films on sliding surfaces may break down. Operate the travel, swing and digging functions, 2 to 3 cycles each, to lubricate, the sliding surfaces, at least once a month. Be sure to check the coolant level and lubrication conditions before operating. 10-1