hitachi — Hitachi ZX14-3/ZX16-3/ZX18-3/ZX27-3 Hydraulic Excavator Operator's Manual

OPERATING ENGINE Before Starting Engine 1 1. Check that pilot control shut-off lever (1) is in the LOCK position. 2. Confirm that all control levers are placed in neutral. 3. Check indicator bulbs as follows: Turn key switch to the ON position. All indicator lights and warning lamps will come on. They will stay on for approximately 3 seconds, except for alternator (3) and engine oil pressure (4) indicator, which will continue to stay on further. IMPORTANT: The monitor panel indicates the machine’s operating conditions. If the machine is operated with an indicator bulb or a warning lamp burned out, the alarm will not be displayed even if any abnormality occurs on the machine.

Accordingly, in case any of the indicator bulbs or the warning lamps do not come ON, immediately contact your authorized dealer for repair. If any of alternator (3) or engine oil pressure (4) fails to light after indicator light check is completed, the machine may have trouble. Immediately contact your authorized dealer for repair. M1NC-05-004 2 4. Adjust the seat position so that all pedals and control levers can be fully stroked to any position when seated in the operator’s seat with the operator’s back kept in contact with the backrest. Fasten the seat belt. f NOTE: The monitor surfaces are resin. Wipe the surface only M1M7-01-007 3 4 with a damp cloth when dusty to keep them clean.

Never use an organic solvent. ZX14-3, 16-3, 18-3 M1NC-01-005 3 4 ZX27-3 M1NC-01-022 3-1