OPERATING MACHINE Precautions for Blade Operation This blade is designed as a light service attachment of the hydraulic excavator. Please keep the following points in mind: This blade is designed for bull dozing work only. Do not attempt to dig deeply with the blade. Doing so may damage not only the blade but the undercarriage as well. Do not apply concentrated or uneven loads to the blade. Never allow the blade to forcefully collide with a load by running the machine into the load. Failure to do so may result in damage to the blade and the undercarriage.
When jacking up the machine with this blade, the surface beneath the blade comes under high pressure, increasing the risk of surface collapse. Always be sure that the surface is strong enough to support the weight of the machine before jacking up the machine. Avoid dangerous uneven distribution of weight to the blade by maintaining even contact between the blade and the ground. While digging with the blade positioned in the front of the machine, take care not to allow the bucket to come into contact with the blade. When digging, take care not to allow the boom cylinder to come into contact with the blade. M586-05-016 M586-05-017 5-5