STOPPING THE ENGINE 18. STOPPING THE ENGINE IMPORTANT Do not switch the engine off while it is under load, other than in an emergency. Switching off under load shortens the working life of the engine. It is equally inadvisable to switch off the engine immediately if it has been under load for an extended period of time and is very hot. Leave the engine turn over with- out load for about 5 minutes to allow it to cool down before switching it off. Before stopping the engine: 1 - Move all levers to neutral position, and engage all the safety locks. 2 - Return the accelerator lever to idling position. 3 - Turn the ignition key to « O » (OFF) position. F00162 D00213 19.
TRANSPORTING THE MACHINE ON ANOTHER VEHICLE 19.1 LOADING AND UNLOADING DANGER Only perform loading and unloading operations on firm, level ground. Keep well away from the edges of ditches and roads. Block the transporting vehicle with wedges in front of and behind its wheels. Make sure that the loading ramps are strong enough. If necessary, place support- ing blocks underneath the ramps to prevent them bending. 80