USING THE WORK EQUIPMENT 22. USING THE WORK EQUIPMENT DANGER Always fasten the safety belt before performing any manoeuvre. Operate the horn button on the right hand control lever to warn other people in the vicinity that you are about to start work. In case of failure, if the machine stops with the work equipment lifted turn the start- ing key to position «I», unlock the safety device, lower the bucket to the ground and release all residual pressure. IMPORTANT The following illustrations are designed only to provide a basic idea of how to use the machine properly. It is up to you to familiarise yourself with the machine and its correct operation.
Make a habit of organising your work in an obstacle free area. Always sit correctly in the driving seat. 22.1 ORGANISATION OF THE WORK AREA If your preliminary inspection of the work area shows that the ground is uneven, cluttered with large obstacles, or sloping, flatten it out as much as possible before starting work. This saves unnecessary strain on the machine and on any lorries to be loaded. Preliminary levelling reduces the total time required for a job. It also saves operator fatigue and strain on the machine, as well as saving digging time and lorry manoeuvring time.
22.2 POSITIONING THE BUCKET ACCORDING TO THE JOB DANGER Take special care when installing the link pins which connect the bucket to the arm and bucket cylinder ram. Metal splinters can easily cause injury. Always wear protective goggles, thick gloves, and a hard hat. 86