Komatsu — 24. MAINTENANCE GUIDE

MAINTENANCE GUIDE Do not place parts or tools in your pockets. They can drop into the machine when you bend over. Do not direct high pressure jets of water at the radiator and hydraulic fluid heat exchanger group when washing the machine. When washing the machine, protect all electrical connectors and avoid wetting the ignition switch. Grease all articulations before starting work on muddy ground, in the rain, on river banks or on the sea shore. On completion of work in these areas, wash the machine immediately to prevent rust from setting in. Grease articulations more frequently in these work environments. When working in a dusty environment:

- Check and clean the air filter frequently to ensure that it does not become clogged. - Clean the radiator and hydraulic fluid heat exchanger group frequently to prevent the cooling fins from becoming clogged. - Change the diesel fuel filter more frequently. - Regularly clean the dust from all electrical components, particularly the alternator and starter motor. Do not mix different brands of oil. If the oil which is available differs from that in the engine, do not top up; change the oil completely. DANGER Lubricants, filters, coolants, and batteries are special waste products and must be disposed of in compliance with local waste disposal laws.

Combustible material from certain components can become extremely dangerous if burned. Never allow burned material to contact your skin or eyes, and avoid breathing fumes from fires. 99