MAINTENANCE NOTES 25.4 NOTES ON LUBRICATION Correct lubrication ensures smooth operation, prevents wear, and eliminates noise at articulations and joints. Lubrication involves the application of either oil or grease. Lubrication maintenance includes: 1 - Checking lubricant levels; 2 - Changing oil; 3 - Greasing articulations via the greasing nipples. Only use recommended lubricants, and choose those most suitable for the ambient tem- perature. Always clean the greasing nipples before pumping in fresh grease. Pump in fresh grease until it starts to exude from the articulation or joint, and then clean up all the old grease which has been expelled.
This is particularly important on rotating parts. Keep lubricants topped up to the correct levels. Too low or too high levels can lead to damage. 25.5 PARTS SUBJECT TO RAPID WEAR AND REQUIRING REGULAR REPLACEMENT Consumable parts such as filters, bucket teeth, etc, must be replaced during scheduled maintenance or whenever they wear out. Replacement of these components during scheduled maintenance enables a more eco- nomical use of the machine. Only use original FKI spare parts, which guarantee quality and interchangeability.
103 GROUP CODE PART Q.ty FREQUENCY OF REPLACEMENT Hydraulic fluid filter 21D-60-11130 Filter element 1 EVERY 250 HOURS Servocontrol filter 21D-60-11220 Filter element 1 EVERY 250 HOURS Engine oil filter 6810-51-5130 Filter element 1 EVERY 250 HOURS Fuel filter 6810-71-6110 Filter element 1 EVERY 500 HOURS Air filter 21D-02-11160 21D-02-11170 Main filter element Backup filter element 1 1 EVERY 500 HOURS EVERY 1000 HOURS Bucket 21D-926-1180 21D-926-1190 21D-926-1210 Teeth Spring pin Spring pin AR AR AR — — —