Komatsu — 26. FUEL, COOLANT, AND LUBRICANTS

FUEL, COOLANT, AND LUBRICANTS IMPORTANT If the diesel fuel has a sulphide content of below 0.5%, change the engine oil at the intervals specified. If the sulphide content is above this figure, change the oil at the intervals stated in the table below. Sulphide content Engine oil change interval from 0.5 to 1.0% 1/2 of normal interval over 1.0% 1/4 of normal interval If the engine is started at an ambient temperature of less than 0 ° C, use SAE 10W, 20W- 20 engine oil even if the daytime temperature rises by 10 ° C. Use engine oil with a CD classification. If you have to use CC class oil, change the oil at half the standard interval.

Only use products which are specially designed for use with your engine, hydraulic sys- tem, and final drives. 1st filling capacity: This is the total quantity of product required to fill the entire system, including oil lines and actuators. Change capacity: This is the quantity of product needed to refill the system following scheduled maintenance operations. ASTM: American Society of Testing and Materials SAE: Society of Automotive Engineers API: American Petroleum Institute MIL: U.S. Military Specifications CCMC: Common Market Manufacturers Committee 105