NUT AND BOLT TIGHTENING TORQUES 27. NUT AND BOLT TIGHTENING TORQUES 27.1 STANDARD TIGHTENING TORQUES # Nm (Newton metre): 1 Nm = 0.102 kgm IMPORTANT This table does not apply to nuts and bolts which have to secure components in nylon or other plastic material, nor to those fitted with washers, nor to those which tighten on to non-ferrous metals.
27.2 SPECIAL TIGHTENING TORQUES 106 Thread diameter (mm) Pitch (mm) Spanner size (mm) 8.8 10.9 kgm Nm kgm Nm 6 8 10 12 14 1 1,25 1,5 1,75 2 10 13 17 19 22 0.96 ± 0.1 2.3 ± 0.2 4.6 ± 0.5 7.8 ± 0.8 12.5 ± 1 9.5 ± 1 23 ± 2 45 ± 4.9 77 ± 8 122 ± 13 1.3 ± 0.15 3.2 ± 0.3 6.5 ± 0.6 11 ± 1 17.5 ± 2 13.5 ± 1.5 32.2 ± 3.5 63 ± 6.5 108 ± 11 172 ± 18 16 18 20 22 24 2 2,5 2,5 2,5 3 24 27 30 32 36 19.5 ± 2 27 ± 3 38 ± 4 52 ± 6 66 ± 7 191 ± 21 262 ± 28 372 ± 40 511 ± 57 644 ± 70 27 ± 3 37 ± 4 53 ± 6 73 ± 8 92 ± 10 268 ± 29 366 ± 36 524 ± 57 719 ± 80 905 ± 98 27 30 3 3,5 41 46 96 ± 10 131 ± 14 945 ± 100 1287 ± 140 135 ± 15 184 ± 20 1329 ± 140 1810 ± 190 GROUP DESCRIPTION kgm Nm Cab platform Front mounting bolts Rear mounting bolts 16 ± 1 157 ± 9.8 Tracks Shoe fixing bolts 16 ± 1 157 ± 9,8 Engine Main front mounting bolt Main rear mounting bolt 16 ± 1 157 ± 9.8 Fifth wheel Revolving frame nuts Chassis bolts 32 ± 1 314 ± 9,8