SCHEDULED MAINTENANCE 29.2 AFTER THE FIRST 50 HOURS # The following operations must be performed after the machine’s first 50 hours work in addition to the operations scheduled for every 50 hours. CHANGE THE HYDRAULIC FLUID RETURN LINE FILTER. CHECK FAN BELT TENSION. See the section «EVERY 250 HOURS» for details on these jobs. 29.3 EVERY 50 HOURS 29.3.a GREASING THE SWIVEL JOINT IMPORTANT Clean greasing nipples (1) before applying the grease gun. 1 Clean up the old grease forced out from the union when you finish. Grease the swivel joint with the recommended grease. (See section «26.
FUEL, COOLANT, AND LUBRI- CANTS».) F00284 29.3.b CLEANING THE ENGINE AIR FILTER DUST TRAP Open the bonnet to gain access to the dust trap. Press the dust trap (1) down with two fingers to open it and expell the dust which inevitably accu- mulates every day. When releasing the trap, make sure that the rub- ber surfaces close efficiently, and are not soiled with sticky oil or grease. 1 IMPORTANT Perform this operation more frequently when working in dusty environments. F00172 115