SCHEDULED MAINTENANCE 29.7.e CHECKING THE GREASE LEVEL IN THE FIFTH WHEEL PINION GEAR IMPORTANT Perform this check while the machine is still hot after a day’s work, i.e. when hot. Check the level of the grease in tank (1) in which the pinion gear (2) and fifth wheel (3) are housed. Remove access panel (4) and check the depth of the grease with a graduated rule. The grease must cover the gear teeth to half their depth, i.e. a depth of about 100 mm. Use the 17 mm wrench. Also check that the grease is not dirty. If necessary change the grease. (See section «29.9.d CHANGING THE GREASE IN THE FIFTH WHEEL PINION GEAR»). D00047 4 1 2 4 3 100 mm F00200 130