SCHEDULED MAINTENANCE IMPORTANT The rate at which the track pins and bushings wear depends on the operating con- ditions and the type of ground. Check and adjust track tension regularly to main- tain efficiency. When working on stony ground, increase track tension slightly to prevent stones from getting between the track chains and the drive sprockets. On soft or muddy ground on the other hand, reduce track tension slightly since mud and earth inevi- tably penetrates between the rollers, sprockets, and chains and tends to increase tension. 29.10.c CHECKING THE SECURITY OF THE TRACK SHOES IMPORTANT Check the tightness of shoe fixing bolts (1) after the first 30 hours work.
Perform the next check after 100 hours, and again after 200 hours if loose bolts are detected. Operating with slack shoe fixing bolts shortens the working life of the tracks. Check the tightness of the shoe fixing bolts with the machine parked on firm, level ground. Use a suitable torque wrench. (See section «27.2 SPE- CIAL TIGHTENING TORQUES»). Use the 19 mm wrench. 1 1 F00291 142