Komatsu — 32.2.1 FITTING THE DEMOLITION HAMMER

AUTHORISED OPTIONAL EQUIPMENT 32. DEMOLITION HAMMER DANGER See section 31.1 OPTIONAL EQUIPMENT SPECIFICATIONS for the technical speci- fications of the demolition hammer. All demolition hammers inevitably make a slot of noise. Wear hearing protection when working with demolition hammers. 32.1 DESCRIPTION AND OPERATION A demolition hammer can be fitted to the end of the arm in place of the standard bucket. The hammer is controlled by push-button (1) on the floor of the cab alongside the boom swing pedal. 1 Press and hold down push-button (1) with your foot to operate the demolition hammer. Simply release the button to stop the hammer.

CAUTION F00705 Before you start work with the demolition hammer, make sure that the selector lever (2) is turned anti-clockwise as far as it will go. 2 F00706 32.2 FITTING AND REMOVING THE DEMOLITION HAMMER 32.2.1 FITTING THE DEMOLITION HAMMER DANGER Park the machine on firm, level ground and lower the equipment to the ground before starting to fit the demolition hammer. 147