PRECAUTIONS TO BE TAKEN WHILE WORKING 3. PRECAUTIONS TO BE TAKEN WHILE WORKING 3.1 STARTING THE ENGINE Before entering the machine, walk around it and take a careful note of all persons and obstacles within range. Do not start the engine if safety notices have been attached to the control levers. Before starting the engine, sound the horn for a moment to alert anyone in the vicinity. Sit correctly in the driving seat and fasten the safety belt before starting the engine. Do not allow anyone else to climb on to the machine or enter the cab.
3.2 CHECKS PRIOR TO REVERSING When working in potentially hazardous areas, or where visibility is restricted, designate someone to control the movements of your machine and of any other vehicles in the area. S00044 Sound the horn to warn persons in the work area before starting to move the machine. Someone might be standing in a blind spot behind the machine (i.e. where he cannot be seen in the rear-view mirrors). Make sure that there is nobody behind the machine before starting to reverse. 12