PRECAUTIONS TO BE TAKEN WHILE WORKING 3.3 MOVING THE MACHINE Before moving the machine, fully raise the blade and raise the bucket 40 ч 50 cm above the ground. This position affords both optimum visibility and stability. Make sure that the revolving frame is turned so that the cab faces the blade. If it is facing the other way, the effect of the steering and controls will be reversed. If you have to use the equipment controls while the machine is moving, do so slowly and with care. Abrupt manoeuvres can rapidly alter the attitude of the machine and make it dif- ficult to steer. When driving over rough terrain, drive slowly and avoid rapid movements of the boom and arm.
If you have to drive over high obstacles while moving, keep the equipment as low as pos- sible and drive slowly to avoid straining the tracks and rollers. D00049 40 ч 50 cm @@@@@ AAAAA BBBBB CCCCC ЂЂЂЂЂ ЃЃЃЃЃ ‚‚‚‚‚ ѓѓѓѓѓ ААААА БББББ ВВВВВ ГГГГГ 13