Komatsu — 16.1.2 DAILY CHECKS

OPERATING THE MACHINE 16. OPERATING THE MACHINE 16.1 CHECKS PRIOR TO STARTING THE ENGINE 16.1.1 VISUAL CHECKS DANGER Dirt, oil, or fuel spilled near hot areas in the engine compartment can lead to fires and seriously damage to the machine. Check frequently and repair leaks immediately. If leaks recur, contact your FKI dealer. Carefully examine the machine, including the underside, before starting the engine, to make sure that: 1 - There are no loose screws or nuts. 2 - There are no oil, fuel, or coolant leaks. 3 - The equipment is not worn or damaged. 4 - All electrical connections are tight. 5 - The exhaust pipe and manifold are firmly connected.

6 - The tracks are correctly tensioned, and the track shoes and drive sprockets are secure 7 - All safety notices are clean and legible. 8 - The cab access hand grips are clean and secure. Repair any leaks or faults immediately, and clean up all traces of oil or grease. Also visually check: 9 - The condition of the safety belt. 10 - The condition of the instruments and dashboard. 11 - The cab windows are clean and unbroken, and the work floodlights are working prop- erly. 16.1.2 DAILY CHECKS DANGER Do not smoke when refilling with fuel, oil, or hydraulic fluid. Do not use naked flames or unapproved lamps to check fluid levels, since these can cause fires.

If fuel, hydraulic fluid, or oil is spilled during filling operations, clean up the spillage immediately. 69