Komatsu — 16.1.3 OPERATING CHECKS

OPERATING THE MACHINE Check the levels of the engine coolant, engine oil, and hydraulic fluid before you start work. Refuel as soon as you finish work in order to prevent condensation forming in the fuel tank, and check the level on the dashboard fuel gauge. IMPORTANT Never fill the fuel tank completely. Leave some space for the fuel to expand. On completion of refuelling, replace the tank cap and check that the breather hole is unobstructed. Check the level of the engine oil with the machine on level ground. Check the level of the hydraulic fluid with the arm and bucket cylinders retracted and the teeth of the bucket resting on the ground.

16.1.3 OPERATING CHECKS DANGER You must be sitting correctly in the driving seat with the safety belt fastened to per- form the following checks. Safety devices may have been removed or disengaged if the machine has been idle or maintained. As you enter the cab, check immediately that the equipment control lock is engaged, and that the equipment cannot move unexpectedly and create a hazard. Check: 1 - That the equipment control lock is engaged. 2 - That the accelerator lever is in idling position. 3 - That the controls are in neutral. For the next set of checks, turn the ignition key to position « I » to energise the dashboard.

Check that the engine warning buzzer, fuel gauge, low oil pressure warning light, alternator warning light, and preheating warning light. 70