OPERATING THE MACHINE Once you have checked the instruments and warmed up the engine and hydraulic fluid, before you move the machine check that the revolving frame rotation lock is engaged. Release the equipment lock and fully raise the blade. Raise the equipment at least 40 ч 50 cm above ground level. Finally, make sure that all control levers are in neutral position. 1 - Set a fast idle with the accelerator lever. F00294 2 - Move both track levers (left and right) forward or back to move the machine in the required direction. N F00297 3 - Pressing switch (1) increases traversing speed while pressing switch (2) resets normal speed.
2 1 D00830 16.5.1 STEERING AND DIRECTION CHANGING DANGER Make sure that the revolving frame is turned so that the cab faces the blade before operating the drive levers. If it is facing the other way, the effect of the steering and controls will be reversed. 74