OPERATING THE MACHINE IMPORTANT Do not operate the accelerator lever abruptly or to fully accelerated position until the engine temperature has reached at least 60 ° C as shown on the dashboard tem- perature gauge. 3 - If you need to warm up the engine more quickly, accelerate occasionally. 4 - Keep an eye on the colour of the exhaust fumes during warm-up, and also check for unusual noises and vibrations. If you notice anything unusual, investigate immediately and perform any necessary repairs. 16.4 WARMING UP THE HYDRAULIC FLUID While the engine is warming up, particularly in cold weather, it is a good idea to warm up the hydraulic circuit as well. When engine temperature reaches 60 ° C:
1 - Disengage the equipment control lock. (See section 11. «SAFETY DEVICES».) 2 - Perform a number of complete and slow extension and retraction manoeuvres of the arm and bucket. 3 - Rest the bucket on the ground and re-engage the control lock 16.5 MOVING THE MACHINE DANGER Before moving the machine, make sure that you are perfectly familiar with the func- tions of all the controls, as well as with the safety precautions associated with them. Check that the revolving frame is turned to face the blade, and that the revolving frame rotation lock is engaged. Make sure that you are correctly seated in the driving seat, with your safety belt fastened.
Before moving the machine, check that nobody else is working within the machine’s operating range, and that the work area is free from obstacles. Exercise particular care before engaging reverse gears. Always check for persons, other vehicles, and obstacles behind you. Do not start to drive the tracks or steer with the engine fully accelerated. The result- ing movement could be very jerky. 73