Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE BRAKE OIL WARNING engine is stopped, and may cause burns. Wait for the then remove cover (2) under the brake 4 - 79 The parts and oil are at high temperature im mediatel temperature to go down before starting the wo When removing the oil filler cap, turn it slowly t o release the i nternal Refill capacity: 31 lite Prepare a container 1. Loosen bolt (1), t component box. 2. Insert the supplied h ose into the oil drain port of d rain valve (3) and set a container in position to catch t 3. Open cover (4) on to p of the platform on t he left si de of the c ab, then remove the ca p from oil filler (F). Pull knob (5) of th counterclockwise to 4.

Loosen drain valve (3) slowly and drain 5. After draining the o hose. Use bolt (1) to inst 6. 7. Replace the brake oil filter element. For details, see "REPLACE FILTER ELEMENT IN BRAKE OIL TANK iller port (F) to the specified level, then install the oil filler cap. s up to the top mark of the specified level. For details, see "CHECK BRAKE OIL TANK PAGE 3-80)". TANK (PAGE 4-80)". 8. Add oil through oil f iller port (F) to the sp ecified l evel, then instal 9. Check that the oil i For LEVEL, ADD OIL ( 10. Start the engine an d bleed the air from t he hydraulic circuit. For details, see "BLEE DING AIR FROM B RAKE HYDRAULIC CIRC UIT (PAGE 4-36)". (4). 11.

Install the oil filler c ap, then close cover