Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE REPLACE FILTER ELEMENT IN BRAKE OIL TANK WARNING may cause burns. Wait for the 4 - 80 The temperature to go dow n before starting the wo When removing the oil filler cap, turn it slowly to release t he inte rnal pressur e, then remov 1. Open the cover on top of the platform on the left side o f the cab, then remove cap (F). Keep grip (1) pulled, turn cap (F) and remove it. counterclockwise, 2. Remove mounting bolts (3) of filter cove r (2), t hen remov e the cover. When doing this, th e cover may spring out under the for ce of spring (4), so hold the cover down when removing the b olts. 3. Remove spring (4) and bypass valve (5), then r emove ele ment (6).

Check that there is clean it. no foreign material inside the tank, then 4. 5. Install a new eleme nt, then place bypas s valve (5) , sprin g (4), and cover (2) into t he tank. ng (7) with a new one. e cover bolts, push down the cover and enly. top of the platform on the left side of the Replace cover O-ri ng (7) with a new on 6. When installing th down the tighten the bolts ev 7. Close the cover on