Komatsu — EVERY 500 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE FUEL PRE-FILTER CARTRIDGE WARNING 1. Turn the valve (1) at the bottom of the fuel tank to the CLOSE position (S). 2. Open the front engine hood. 3. Set the container to catch the fuel under the filter cartridge (2). 4. Loosen drain valve (3), then drain all the water and sediment in the transparent cap (4) and also the fuel accumulated in filter cartridge (2). 5. Using a filter wrench, turn transparent cap (4) to the left to remove it. (This cap is used again.) 6. Using a filter wrench, turn filter cartridge (2) counterclockwise to remove it.

4 - 55 After the engine has been o perated, all parts are at high temperature, so do not replace the filter im mediately. Wait for all parts to cool down before startin g the operation. inside the engine fuel piping system when the engine is running. High pressure is generated When replacing the filter, wait for at least 30 seconds after stopping the engine to let the intern al pressure go down before replacing the filter. me close. Do not bring any fire or fla NOTICE Genuine Komatsu fuel filte r cartridges use a special filter that has highly efficient filtering abilit y. When replacing the filter cartridge, always use a ge nuine Komatsu part.

The common rail fuel injec tion system used on this machine consists of more precise parts tha n the conventional injection pump and nozzle. If any part other than a gen uine Komatsu filter cartridge is used, dust or dirt may get in and cause problems with the injection system. Always avoid usin g substitute parts. When carrying out inspecti on or maintenance of the fuel system, pay more attention than norma l to the entry of dirt. If dirt is stuck to any part, use fuel to wash it off completely. Prepare a container to c