Komatsu — EVERY 5000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE on yourself. remove drain plug drained. SYSTEM (PAGE 4-44)". 4 - 83 5. Remove the undercove 6. Set the oil container un e machine. Using the handle, remo ve drain plug (P), (A) and d rain the oil. Check the O-ring instal led to plug (P), (A), and if it i s damaged, replace the O-ring. Afte r draining the oil, tighten dr ain plug (P), (A). drain plug (P) and (A) o 8 kgm, 43.3 to 57.9 lbft) ot to get oil hen If they are r, almost the same amount of oil can be 7. Add the replacement a mount of oil through oil filler (F). Check that the oil level is bet ween the H and L l ines on the sight gauge (G).

For details of oil level c heck, see "Check Oil Leve l in Hydrauli c Tank, Add Oil (PAG 8. Install the undercover ( 9. Bleed the air from the h For details of the metho d of bleeding the air from th e hydraulic c ircuit, see "BLEEDING AIR FROM HYDRAULIC