4.Replace: V-belt ***************************************************** Replacing steps: Install the bolts 1 (90101-06016) into the secondary fixed sheave hold. NOTE: Tightening the bolts 1 will push the secondary sliding sheave away, causing the gap between the secondary fixed and sliding sheaves to widen. Remove the V-belt 1 from the primary sheave and secondary sheave. Install the V-belt. NOTE: Install the V-belt so that its arrow faces the direction shown in the illustration. Remove the bolts. ***************************************************** CLEANING THE SPARK ARRESTER 1.Clean: Spark arrester ***************************************************** Cleaning steps:
Select a well-ventilated area free of com- bustible materials. WARNING Always let the exhaust system cool before performing this operation. Do not start the engine when removing the tailpipe from the muffler. Remove the bolts 1 . Remove the tailpipe 2 by pulling it out of the muffler. 3 - 37 CHECKING THE V-BELT/ CLEANING THE SPARK ARRESTER CHK ADJ CHK ADJ