Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

Loosen the locknut 4 . Turn the adjusting bolt 5 until the brake pedal height is within the specified limits. Tighten the locknut 4 . NOTE: When adjusting the brake pedal height make sure the locknut-to-adjusting bolt clearance b does not exceed 2 mm (0.08 in). Loosen the locknut 6 . Pull up the brake outer cable and turn the brake cable adjusting (nut) 7 until the clear- ance c is within the specified limits. NOTE: Make sure the pin 8 is all the way to the right of the link plate hole. Hold the adjusting nut 7 and tighten the locknut 6 . Turn the brake lever cable adjuster (handle- bar) 2 until the rear brake lever free play d is within the specified limits.

Tighten the locknut (handlebar) 1 . 3 - 40 ADJUSTING THE REAR BRAKE CHK ADJ CHK ADJ Rear brake pedal height: 45 mm (1.77 in) Clearance c: 1 mm (0.04 in) Rear brake lever free play: 0.5 ~ 2 mm (0.02 ~ 0.08 in)