Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

CHECKING THE BRAKE HOSE/ BLEEDING THE HYDRAULIC BRAKE SYSTEM 2.Check: Front brake hoses 1 Rear brake hoses 2 Cracks/wear/damage Replace. Fluid leakage Replace the hose. Refer to “FRONT AND REAR BRAKES” in CHAPTER 8. NOTE: Hold the machine in an upright position and apply the front or rear brake. 3.Check: Brake hose clamp Loosen Tighten. 4.Install: Right footrest board Refer to “FOOTREST BOARDS”. Front fender Front carrier Seat Refer to “SEAT, CARRIERS, FENDERS AND FUEL TANK”. BLEEDING THE HYDRAULIC BRAKE SYSTEM WARNING Bleed the brake system if: The system has been disassembled. A brake hose or brake pipe have been loosened or removed. The brake operation has been faulty.

A loss of braking performance may occur if the brake system is not properly bled. The brake fluid has been very low. 3 - 44 CHK ADJ CHK ADJ