Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

CHECKING THE FINAL GEAR OIL LEVEL/ CHANGING THE FINAL GEAR OIL CHECKING THE FINAL GEAR OIL LEVEL 1.Place the machine on a level place. 2.Loosen: Oil check bolt 1 NOTE: Loosen the slightly. Do not remove the bolt, otherwise the gear oil may come out. 3.Check: Check that gear oil seeps out from where the check bolt was loosened. If no gear oil seeps out, change the final gear oil. Refer to “CHANGING THE FINAL GEAR OIL”. CHANGING THE FINAL GEAR OIL 1.Place the machine on a level surface. 2.Place a container under the final gear case to collect the used oil. 3.Remove: Oil filler bolt Drain plug 1 4.Drain: Final gear oil 5.Install: Check the gasket (drain plug).

If it is damaged, replace it with a new one. 3 - 48 CHK ADJ CHK ADJ Drain plug ● R. T. R. T. 23 Nm (2.3 m • kg, 16 ft • lb) NOTE: