Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

Check that locknuts 2 are tightened cor- rectly. If the operation of the select lever is incor- rect, adjust the select lever control cable 3 with the adjuster 4 . Select lever shift rod: Make sure the select lever is in NEUTRAL. Loosen both locknuts 1 . Adjust the shift rod length for smooth and correct shifting. Tighten the locknuts 1 . ***************************************************** ADJUSTING THE REAR BRAKE LIGHT SWITCH NOTE: The rear brake light switch is operated by movement of the brake pedal. The rear brake light switch is properly adjusted when the brake light comes on just before the braking effect starts. 1.Check: Rear brake light operation timing Incorrect Adjust. 2.Adjust:

Rear brake light operation timing *********************************************** Hold the main body 1 of the rear brake light switch so that it does not rotate and turn the adjusting nut 2 in direction a or b until the rear brake light comes on at the proper time. ***************************************************** 3 - 47 ADJUSTING THE SELECT LEVER CONTROL CABLE AND SHIFT ROD/ ADJUSTING THE REAR BRAKE LIGHT SWITCH CHK ADJ CHK ADJ Direction a Brake light comes on sooner. Direction b Brake light comes on later.