Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

NOTE: Set the tester to the “ ΩЧ 1” position. If the tester indicates o, replace the fuse. ***************************************************** 3.Replace: Blown fuse ***************************************************** Replacement steps: Turn off the ignition. Install a new fuse of the proper amperage. Turn on switches to verify operation of the related electrical devices. If the fuse immediately blows again, check the electrical circuit. ***************************************************** WARNING Never use a fuse with a rating other than that specified. Never use other materials in place of a fuse.

An improper fuse may cause extensive damage to the electrical system, a malfunction of the lighting and ignition systems and could possibly cause a fire. 3 - 64 CHECKING THE FUSE CHK ADJ CHK ADJ Pocket tester: P/N. YU-03112, 90890-03112 Description Current rating Quantity Main 30 A 1 Headlight 15 A 1 Ignition 10 A 1 Terminal (Auxiliary DC jack) 10 A 1 4WD (Four- wheel drive) 3 A 1 Signaling system fuse 10 A 1 Backup fuse (odometer) 10 A 1 Reserve 30 A 1 Reserve 15 A 1 Reserve 10 A 1 Reserve 3 A 1