5.Check: Battery terminals Dirty Clean with a wire brush. Poor connection Correct. NOTE: After cleaning the terminals, apply a light coat of grease. 6.Install: Battery 7.Connect: Battery leads CAUTION: First, connect the positive lead 1 , then connect the negative lead 2 . 8.Install: Battery lead cover Battery holding bracket Seat Refer to “SEAT, CARRIERS, FENDERS AND FUEL TANK”. CHECKING THE FUSE CAUTION: Always turn off the main switch when checking or replacing a fuse. Otherwise, a short circuit may occur. Seat Refer to “SEAT, CARRIERS, FENDERS AND FUEL TANK”. 2.Inspect: 1.Remove: Fuses ***************************************************** Checking steps:
Connect the pocket tester to the fuse and check it for continuity. 3 - 63 CHECKING THE BATTERY/CHECKING THE FUSE CHK ADJ CHK ADJ