REMOVING THE ROCKER ARM 1.Remove: Rocker arm shafts 1 Rocker arms 2 NOTE: Use a slide hammer bolt 3 and weight 4 to remove the rocker arm shafts. Slide hammer set: P/N. YU-01083-A Slide hammer bolt (M6): P/N. 90890-01083 Weight: P/N. 90890-01084 CHECKING THE ROCKER ARM 1.Check: Rocker arm lobes 1 Valve adjusters 2 Blue discoloration/pitting/scratches Replace. 2.Check: Rocker arms Rocker arm shafts Damage/wear Replace. ***************************************************** Checking steps: Check the two contact areas on the rocker arms for signs of abnormal wear. 1) Rocker arm shaft hole. 2) Camshaft lobe contact surface. Excessive wear Replace. Check the surface of the rocker arm shafts.
Blue discoloration/pitting/scratches Replace/check lubrication. Measure the inside diameter a of the rocker arm holes. Out of specification Replace. Rocker arm inside diameter: 12.000 ~ 12.018 mm (0.4724 ~ 0.4731 in) 4 - 14 ROCKER ARMS ENG