ROCKER ARMS Measure the outside diameter b of the rocker arm shafts. Out of specification Replace. Rocker arm shaft outside diameter: 11.976 ~ 11.991 mm (0.4715 ~ 0.4721 in) Calculate the clearance by subtracting the rocker arm shaft outside diameter from the rocker arm inside diameter. Clearance greater than 0.08 mm (0.003 in) Replace the defective part(s). Rocker arm to shaft standard clearance: 0.009 ~ 0.042 mm (0.0004 ~ 0.0017 in) ***************************************************** INSTALLING THE ROCKER ARM 1.Apply: Engine oil (onto the rocker arm shafts) 2.Install: Rocker arms 1 Rocker arm shafts 2 NOTE: The thread hole a of the rocker arm shaft must face to the outside.
After installation, make sure that the thread hole a of the rocker arm shaft is positioned correctly, as shown in the illustration. 4 - 15 ENG