Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

CHECKING THE VALVE AND VALVE SPRING 1.Measure: Stem-to-guide clearance Stem-to-guide clearance = valve guide inside diameter a valve stem diameter b Out of specification Replace the valve guide. Clearance (stem to guide): Intake: 0.010 ~ 0.037 mm (0.0004 ~ 0.0015 in) : 0.08 mm (0.0031 in) Exhaust: 0.025 ~ 0.052 mm (0.0010 ~ 0.0020 in) : 0.10 mm (0.0039 in) 2.Replace: Valve guide ***************************************************** Replacement steps: NOTE: To ease guide removal, installation and to maintain correct fit, heat the cylinder head to 100 °C (212 °F) in an oven. Remove the valve guide using a valve guide remover 1 .

Install the new valve guide using a valve guide remover 1 and valve guide installer 2 . After installing the valve guide, bore the valve guide using a valve guide reamer 3 to obtain proper stem-to-guide clearance. Valve guide remover (ш 6): P/N. YM-4064-A, 90890-04064 Valve guide installer (ш 6): P/N. YM-04065-A, 90890-04065 Valve guide reamer (ш 6): P/N. YM-04066, 90890-04066 NOTE: After replacing the valve guide reface the valve seat. ***************************************************** 4 - 26 VALVES AND VALVE SPRINGS ENG