Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

3.Check: Valve face Pitting/wear Grind the face. Valve stem end Mushroom shape or diameter larger than the body of the stem Replace. 4.Measure: Margin thickness a Out of specification Replace. Margin thickness: Intake: 0.85 ~ 1.15 mm (0.0335 ~ 0.0452 in) Exhaust: 0.85 ~ 1.15 mm (0.0335 ~ 0.0452 in) 5.Measure: Runout (valve stem) Out of specification Replace. NOTE: When installing a new valve always replace the guide. If the valve is removed or replaced always replace the oil seal. 6.Eliminate: Carbon deposits (from the valve face and valve seat) 7.Check: Valve seats Pitting/wear Reface the valve seat. 4 - 27 VALVES AND VALVE SPRINGS ENG Runout limit: 0.01 mm (0.0004 in)