Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

RECOIL STARTER AND AC MAGNETO REMOVING THE AC MAGNETO 1.Remove: Starter pulley 1 NOTE: Use the rotor holding tool 2 to hold the starter pulley. 2.Remove: Crankcase cover (left) Gasket Dowel pins NOTE: Working in a crisscross pattern, loosen each bolt 1/4 of a turn. Remove them after all of them are loosened. 3.Remove: CDI rotor 1 NOTE: Use the flywheel puller 2 . DISASSEMBLING THE RECOIL STARTER 1.Remove: Cap 1 Starter handle 2 NOTE: Before untying the knot 3 above the starter handle, make a knot 4 in the rope so that the rope is not pulled into the case. CHECKING THE AC MAGNETO 1.Check: Starter coil Pickup coil Damage Replace. 4 - 41 ENG Rotor holding tool: P/N.

YU-01235, 90890-01235 Flywheel puller: P/N. YM-01404, 90890-01404