RECOIL STARTER AND AC MAGNETO CHECKING THE STARTER CLUTCH 1.Check: Starter one-way clutch 1 Cracks/damage Replace. Bolts 2 (starter clutch) Loose Replace with a new one, and clinch the end of the bolt. NOTE: The arrow mark on the starter clutch must face inward, away from the CDI rotor. Bolts (starter clutch): 30 Nm (3.0 m • kg, 22 ft • lb) LOCTITE ® T R . . ***************************************************** Inspection steps: Install the starter wheel gear to the starter clutch, and hold the starter clutch. When turning the starter wheel gear counter clockwise И , the starter clutch and the wheel gear should be engaged. If not, the starter clutch is faulty. Replace it.
When turning the starter wheel gear clock- wise Й , the starter wheel gear should turn freely. If not, the starter clutch is faulty. Replace it. ***************************************************** 2.Check: Gear teeth (starter idle) 1 Gear teeth (starter wheel) 2 Burrs/clips/roughness/wear Replace. 3.Check: Starter wheel gear (contacting surface) Damage/pitting/wear Replace. 4 - 42 ENG