2.Install: Starter spring 1 Sheave drum assembly 2 NOTE: Mesh the spring hook 3 with the case slit, then wind the spring clockwise into the case from the larger to smaller diameter. Mesh the sheave drum hook 4 with the spring hook 5 . Spring 1 3.Install: Friction plate 2 Nut NOTE: Insert the spring hooks into the pawl side holes. 4.Turn the sheave drum 3-turn clockwise to give preload to the spring. 5.Install: Starter handle 1 Cap 2 NOTE: Pass the rope through the case hole and make a knot 3 on the rope so that the rope is not pulled into the case. Untie the knot 3 after making a knot 4 above the handle. INSTALLING THE AC MAGNETO 1.Apply:
Sealant (Quick Gasket ® ) 1 (into the slit) Sealant (Quick Gasket ® ): P/N. ACC-11001-05-01 Yamaha bond No. 1215: P/N. 90890-85505 4 - 44 RECOIL STARTER AND AC MAGNETO ENG