Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

REMOVING THE PRIMARY AND SECONDARY SHEAVES 1.Loosen: Nut (secondary sheave) 1 Nut (primary sheave) 2 NOTE: Use the sheave holder 3 to hold the primary sheave. First, loosen the nut (secondary sheave) 2 , then loosen the nut (primary sheave) 1 . DISASSEMBLING THE SECONDARY SHEAVE 1.Remove: Nut 1 ***************************************************** Removing steps: Attach the sheave fixed block 2 , locknut wrench 3 and sheave spring compressor 4 to the secondary sheave assembly. Sheave fixed block: P/N. YM-04135, 90890-04135 Locknut wrench: P/N. 90890-01348 Sheave spring compressor: P/N. YM-04134, 90890-04134 Place the sheave fixed block in a vise and secure it.

Tighten the sheave spring compressor nut 5 and compress the spring. Loosen the nut 1 with the locknut wrench 3 . Remove the nut 1 . Remove the sheave spring compressor and locknut wrench. ***************************************************** 4 - 55 PRIMARY AND SECONDARY SHEAVES ENG Sheave holder: P/N. YU-01880, 90890-01701