CHEKING THE PRIMARY SHEAVE 1.Check: Weight outside diameter a Out of specification Replace the weight. Weight outside diameter: 30 mm (1.18 in) : 29.5 mm (1.16 in) 2.Check: Primary puller slider Primary sliding sheave splines Wear/cracks/damage Replace. Spacer Primary puller cam Cracks/damage Replace. 3.Check: Primary sliding sheave Primary fixed sheave Cracks/damage Replace. CHECKING THE SECONDARY SHEAVE 1.Check: Secondary fixed sheave smooth operation Secondary sliding sheave smooth operation Scratches/damage Replace as a set. 2.Check: Torque cam groove 1 Wear/damage Replace. 3.Check: Guide pin 2 Wear/damage Replace. 4.Check: Secondary sheave spring Damage Replace. 5.Measure:
Secondary sheave spring free length a Out of specification Replace the second- ary sheave spring. Free length: 124.2 mm (4.89 in) : 121.2 mm (4.77 in) 4 - 56 PRIMARY AND SECONDARY SHEAVES ENG