PRIMARY AND SECONDARY SHEAVES ASSEMBLING THE PRIMARY SHEAVE 1.Clean: Primary sliding sheave face 1 Primary fixed sheave face 2 Collar 3 Weight 4 Primary sliding sheave cam face NOTE: Remove any excess grease. 2.Install: Weight 1 NOTE: Apply Yamaha Grizzly grease (90 g) to the whole outer surface of the weight and install. Apply Yamaha Grizzly grease to the inner surface of the collar. Apply Yamaha Grizzly grease to the inner surface of the primary sliding sheave. 3.Install: Spacer Slider 1 Cam 2 Primary sliding sheave cap ASSEMBLING THE SECONDARY SHEAVE 1.Apply:
BEL-RAY assembly lube ® (to the secondary sliding sheave 1 inner surface and oil seals) BEL-RAY assembly lube ® (to the bearings, oil seals and inner surface of the secondary fixed sheave 2 ) 2.Install: Guide pin 1 4 - 57 ENG R. T. 3 Nm (0.3 m • kg, 2.2 ft • lb)